doubleshadow's DBOX2 (1.11)
Moderators: Moderators for English X Forum, Scripting / Modding Moderators
- Midimaster
- Posts: 265
- Joined: Wed, 6. Sep 06, 14:46
thank you for your prompt support!
which xform do you mean? afaik the both modifiers "xform" and "reset xform" are based on gmax and are necessary for scaling the bodys to the right size and i never found another modifier..?!.. (i remember when i imported my first ship into x3 it was an M6+ with the size of an M3... ).
so, I will check the file tonight, if my son is fallen asleep....
Edit:
ok, I replaced the file, and everything seems to be fine , but i did not test the scene in X3, yet, but I will let you know!
Thank you again for your support!
which xform do you mean? afaik the both modifiers "xform" and "reset xform" are based on gmax and are necessary for scaling the bodys to the right size and i never found another modifier..?!.. (i remember when i imported my first ship into x3 it was an M6+ with the size of an M3... ).
so, I will check the file tonight, if my son is fallen asleep....
Edit:
ok, I replaced the file, and everything seems to be fine , but i did not test the scene in X3, yet, but I will let you know!
Thank you again for your support!
-
- Posts: 671
- Joined: Fri, 12. Mar 04, 08:14
Midimaster wrote:whatever i try the Scenes are exported from dbox like this:
looking for dbox xform
not found
rotation: (eulerAngles ...)
...
of course the x form modifier was applied...
I was reffereing to my own object stack modifier called dbox_xform - I thought you were reffering to that. Of course you can (and must) use the original Reset Xform button (and the build in Xform modifier) to get the objects exported correctly.doubleshadow wrote:Do not apply the dbox_xform modifier! It was experimental feature and it doesn't work correctly.
-
- Posts: 671
- Joined: Fri, 12. Mar 04, 08:14
-
- Posts: 265
- Joined: Fri, 7. Jul 06, 11:36
- twistedtech
- Posts: 246
- Joined: Mon, 3. Nov 03, 00:34
-
- Posts: 671
- Joined: Fri, 12. Mar 04, 08:14
This is bug in 3ds Max.Crip67 wrote:im getting error message from 3ds ver 8 "error loading peramblock2" and then "invalid file- only partially loaded" did i do something wrong?
How to fix it:
Move plugin [3ds max]\plugins\dbox2_x3material.ms to some temporary location (c:\tmp\) so Max will not find it.
Restart Max and open the "bad" scene. An error will occur (Unable to load library blah blah...) - ignore it. The scene will open just fine but you will loose any X Materials. That's inevitable.
Now save the scene (maybe under a different name). Close Max and return the dbox2_x3material.ms file back into its original location.
Start Max and open the scene. Now you have to import some BOD file with the same materials you had in your scene. Once you import them, DBOX will create the now fully persistent X Materials and you can attach then to your objects (bodies). Delete the temporary imported objects. Save the scene.
It's a lot of work, but since the whole 3ds Max is buggy (take any version you want) it's the only way (I know of).
-
- Posts: 671
- Joined: Fri, 12. Mar 04, 08:14
@Crip67
@Observer
I know exactly what are you talking about. Me and Deadly run into the same problem with both Max 5 and 8.
Crip - my previous description should work. As soon as you remove the "dbox2_x3material.ms" file from the "plugins" directory, you cannot possibly have any "param block error", but you will have "Cannot find dll" error (if your max scene contains X material).
Maybe you just copied the dbox2_x3material.ms instead of moving it? You can as well just delete it - or uninstall the whole dbox That should work...
Then follow the procedure from my previous post.
@Observer
I know exactly what are you talking about. Me and Deadly run into the same problem with both Max 5 and 8.
Crip - my previous description should work. As soon as you remove the "dbox2_x3material.ms" file from the "plugins" directory, you cannot possibly have any "param block error", but you will have "Cannot find dll" error (if your max scene contains X material).
Maybe you just copied the dbox2_x3material.ms instead of moving it? You can as well just delete it - or uninstall the whole dbox That should work...
Then follow the procedure from my previous post.
now if this could only be made to work with blender, that would make life a lot easier for some people, i know not a lot of people like it, but i find it fairly easy to use and dont feel like working out another 3d application yet, as i have not fully worked that out.
About the name - i was lost for a name on the forum and looking round, then a Bob Hope film came on, and i thought "that will do nicely"
i was born and raised argumentative i dont mean to offend ...... sorry
i was born and raised argumentative i dont mean to offend ...... sorry
-
- Posts: 671
- Joined: Fri, 12. Mar 04, 08:14
... i know not a lot of people like it... - and that's the problem. I can't even make a decent box in Blender. It's a bit hard to make an importing/exporting program for something you cannot use properly. Not to mention I'm not too keen to learn Python (or more precisely Python for Blender).bob hope wrote:now if this could only be made to work with blender, that would make life a lot easier for some people, i know not a lot of people like it, but i find it fairly easy to use and dont feel like working out another 3d application yet, as i have not fully worked that out.
-
- Posts: 265
- Joined: Fri, 7. Jul 06, 11:36
thought i could ask this here. i may have found a problem with dbox or in general. everytime i export a material with a lightmap in it the whole texture begins to glow in the game, even the non lighted parts.
i tried several ways to avoid this, leaving all x3 parameters from an original model, having none of any x3 shader properties and so on. always the same result, glowing parts.
as i also copied an original x3 material with lightmap on my model which glowed ingame either i thought it must be something with the exporter.
did anyone had problems like this? is there a way to solve this problem?
i tried several ways to avoid this, leaving all x3 parameters from an original model, having none of any x3 shader properties and so on. always the same result, glowing parts.
as i also copied an original x3 material with lightmap on my model which glowed ingame either i thought it must be something with the exporter.
did anyone had problems like this? is there a way to solve this problem?
Sorry Doubleshadow, dont mean to henpeck you, what type of box do you want to make? just a plain cube or something more fancy?
this is like me asking for a drawing package and getting cs2 which to me is more picture and image manipulation that drawing, i spent all my time shouting that i just wanted to draw using the gfx tablet, i dont want to select stuff and the rest ...
this is like me asking for a drawing package and getting cs2 which to me is more picture and image manipulation that drawing, i spent all my time shouting that i just wanted to draw using the gfx tablet, i dont want to select stuff and the rest ...
About the name - i was lost for a name on the forum and looking round, then a Bob Hope film came on, and i thought "that will do nicely"
i was born and raised argumentative i dont mean to offend ...... sorry
i was born and raised argumentative i dont mean to offend ...... sorry
-
- Posts: 671
- Joined: Fri, 12. Mar 04, 08:14
@I_E_Maverick - I have no idea. Try to ask at XFP or XTM forums. These guys should know.
No - a simple box, 6 sides, 8 verts you know... I must admit that I haven't read the manual nor any tutorials. I just think for something like this, you don't have to do that. Of course I was busy at the time so I really didn't get Blender a chance.bob hope wrote:what type of box do you want to make? just a plain cube or something more fancy?
-
- Posts: 671
- Joined: Fri, 12. Mar 04, 08:14
Have you read the manual? (Unlikely):Jiggaman wrote:I am good all the way up until I try to import the bod file of a extracted XSP file. It says something about the there's no proper import module or something to that effect.
- [3ds max]\scripts\DBOX2\readme.txt
- [3ds Max]\help\dbox2.chm
and finally How to start DBOX.
-
- Posts: 671
- Joined: Fri, 12. Mar 04, 08:14